-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
ICD Adds Matched Delay Optimization to Stackup Planner
June 20, 2016 | ICDEstimated reading time: 1 minute
In-Circuit Design Pty Ltd (ICD), Australia, developer of the ICD Stackup and PDN Planner software, has released a Matched Delay Optimization feature for the Stackup Planner.
Signals propagate at the speed-of-light in free space. However, this speed varies dramatically depending on the surrounding dielectric materials. Each layer, of a multilayer PCB, can have a very different propagation speed. This is particularly important for the latest high-speed DDR3/4 memory devices. The new “Matched Delay Optimization” feature, of the ICD Stackup Planner, allows you to not only match the length of busses, but takes this one step further by automatically calculating the appropriate length required to match the delay exactly. The integrated field solver simulates the flight time, of each signal layer, to quickly give you the results you need to effectively route memory.
“A matched length of 2.3 inches for a DDR3/4 Data lane can produce up to 70ps delta, between signal layers, leaving the timing way outside the required DDR3/4 setup and hold times,” said Barry Olney, CEO. “Designers need to pay strict attention to the signal propagation, on each layer, ensuring the total flight time of the critical signals match, regardless of length. The ICD Stackup Planner now allows you to optimize this delay."
The relative signal propagation is displayed as a bar graph, once the matched length has been set. Selecting “Matched Delay” automatically optimizes the length, of each signal layer, to match the maximum delay. The user can then route the data lane, to the exact delay, in their preferred design tool.
About In-Circuit Design Pty Ltd
In-Circuit Design Pty Ltd, based in Australia, developer of the ICD Stackup and PDN Planner software, is a PCB Design Service Bureau and specialist in board level simulation. Visit www.icd.com.au.
Suggested Items
Elementary, Mr. Watson: Ensuring Design Integrity
03/28/2024 | John Watson -- Column: Elementary, Mr. WatsonBack in February, many of us watched the "Big Game." It reminded me of the saying, “It's not how you start that is important, but rather how you finish." It is perfectly okay when you are talking about sports, you get off to a bad first half and need to recover in the second half. However, when it comes to PCB design, this is not a good practice. If things start badly, they usually don't recover. They continue down that same path, costing more money and losing design time.
Arrow Electronics Launches Intelligent Vision Ecosystem
03/27/2024 | BUSINESS WIREArrow Electronics, Inc. is utilizing the onsemi Imager Access System (IAS) module standard for developing intelligent vision solutions for use in robotics, machine vision, commercial cameras and other uses.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.
Synopsys Announces New AI-Driven EDA, IP and Systems Design Solutions At SNUG Silicon Valley
03/25/2024 | PRNewswireSynopsys, Inc. kicked off its annual flagship Synopsys User Group (SNUG) conference in Silicon Valley at the Santa Clara Convention Center with a keynote presentation by Synopsys president and CEO Sassine Ghazi. Ghazi discussed the unprecedented innovation opportunities and challenges that technology R&D teams face in this era of pervasive intelligence.
New North American Product Family Release from Smart Factory Design
03/22/2024 | Smart Factory DesignSmart Factory Design is pleased to announce a new system technology and supply chain model for providing Zero Liquid Discharge (ZLD) Wastewater Recycling Systems to the North American market. Smart Factory Design is an international public benefit company focused on environmental sustainability and autonomous processes for the Printed Circuit Board, IC Substrate, and General Metal Finishing industries.