Synopsys Selects Zuken Software for HAPS Prototyping System PCB Design


Reading time ( words)

Synopsys has chosen Zuken’s CR-8000 PCB design platform for their HAPS FPGA-based prototyping family of products.

Synopsys sought the highest-performing PCB design platform available to assist with designing complex high-speed boards for their HAPS prototyping systems. Synopsys’ integrated and scalable hardware and software FPGA-based prototyping systems accelerate pre-silicon software development, hardware/software integration and system validation of IP and SoC designs. HAPS systems are used by design and validation teams to accelerate their SoC design schedules and avoid costly device re-spins.

John KoeterZuken’s CR-8000 met all of our requirements and we are using it to design the new high performance components in our next-generation HAPS systems.

John Koeter, Vice President of Marketing for IP and Prototyping at Synopsys, said, “To develop Synopsys’ highest performing SoC prototyping systems, we need a PCB design environment that can address the routing, signal integrity and timing margin challenges on these complex boards. Zuken’s CR-8000 met all of our requirements and we are using it to design the new high performance components in our next-generation HAPS systems.”

Zuken’s CR-8000 is the industry’s only 3D, multi-board PCB design platform based on product-centric design principles. CR-8000 takes advantage of today’s multi-core processors and the latest graphics standards to maximize performance.

Kent McLeroth, CEO Zuken USA, said “Synopsys and Zuken have a long history of successful collaboration, and we look forward to continuing this relationship. The size and complexity of Synopsys’ HAPS systems is exactly the type of challenge we had in mind when developing the next generation CR-8000 design platform.”

For more information see www.zuken.com/cr-8000 and www.synopsys.com/HAPS  

About HAPS

Synopsys HAPS® (High-performance ASIC Prototyping Systems) FPGA-based prototyping solution provides an integrated and scalable hardware-software solution used by design and validation teams to improve their ASIC design schedules and avoid costly device re-spins. HAPS systems enable a more parallel hardware/software development strategy where software developers, validation engineers and system integration experts have access to prototypes running at near real time speed months before tape-out of new ASIC silicon. FPGA-based prototypes are ideal for pre-silicon software development, system validation and hardware/software integration of ASIC IP and SoC designs.

About CR-8000

With a fully integrated design flow from initial planning through circuit engineering, physical layout and manufacturing output, CR-8000 is the only concept-to-manufacturing, native 2D and 3D, single and multi-board system design platform on the market. It was developed from the start to address the challenges of system-level design optimization, offering companies a competitive edge in their product design by supporting faster design turnaround and improved time-to-market. Base components include: System Planner, Design Gateway, Design Force and DFM Center.

About Zuken

Zuken is a global provider of leading-edge software and consulting services for electrical and electronic design and manufacturing. Founded in 1976, Zuken has the longest track record of technological innovation and financial stability in the electronic design automation (EDA) software industry. The company’s extensive experience, technological expertise and agility, combine to create world-class software solutions. Zuken’s transparent working practices and integrity in all aspects of business produce long-lasting and successful customer partnerships that make Zuken a reliable long-term business partner.

Zuken is focused on being a long-term innovation and growth partner. The security of choosing Zuken is further reinforced by the company’s people—the foundation of Zuken’s success. Coming from a wide range of industry sectors, specializing in many different disciplines and advanced technologies, Zuken’s people relate to and understand each company’s unique requirements.

Share

Print


Suggested Items

This Month in Design007 Magazine: HDI Design, Landless Vias, VeCS, and More

11/09/2020 | I-Connect007 Editorial Team
Andy Shaughnessy, Happy Holden, and Dan Feinberg recently met with James Hofer, general manager of Accurate Circuit Engineering, to discuss via design techniques and via reliability from the fabricator’s viewpoint. As Hofer explained, even with open lines of communication between the designer and the board shop, there are plenty of variables to contend with regarding proper via design, especially when working with PTFE materials.

Roundtable Discussion: App Notes and Fab Notes

11/09/2020 | Andy Shaughnessy, Design007 Magazine
Andy Shaughnessy recently invited four recent contributors—Dana Korf, Jen Kolar, Mark Thompson, and Kelly Dack—to review the June and August 2020 issues of Design007 Magazine, which covered app notes and fab notes, respectively. In this wide-ranging roundtable, the group discusses some of the ongoing challenges related to incomplete and inaccurate design data and why communication can preclude many of these problems. What follows is the transcript from this conversation.

Real Time with… AltiumLive 2020: Vince Mazur Previews New Design Rule Features

11/03/2020 | I-Connect007 Editorial Team
Altium Technical Marketing Manager Vince Mazur discusses his presentation at the recent AltiumLive, which focused on updates to Altium Designer's approach to creating design rules and constraints. Vince explains that these features will be more intuitive for the user, and the update, which is currently in beta, will be released in the future. The company is shifting from “rule-centric” design rules features to capabilities that are more “design-centric,” with applicable rules for each object available at one click.



Copyright © 2020 I-Connect007. All rights reserved.