-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Thermal Characterization of LEDs: Enabling the Upcoming Lighting Revolution
October 29, 2014 | Dr. John Parry, CEng., Mentor GraphicsEstimated reading time: 1 minute
According to a June 2012 report from the Climate Group, many commercially available, outdoor light-emitting diode (LED) products offer high-quality light, durability, and significant electricity savings in the range of 50 to 70%. More European cities are adopting LED streetlights because LEDs can save energy costs, while exceeding local lighting standards. They last 50,000 to 100,000 hours, change little in color, and have a failure rate of around 1%, compared, for example, to up to 10% for ceramic metal halide fixtures over a similar time period. LED streetlights are a gateway technology--when LED designers solve the current problems of reducing cost and thermal challenges, they’ll be paving the way for wider adoption and the energy-saving potential of LEDs.
Thermal management is one of the more complex areas of LED system design. And until a few years ago, the methods and technology to scientifically characterize the thermal behavior of the component, as well as its systems and subsystems, were not available. Instead, most engineers calculate their thermal needs from data sheets published by component manufacturers. Understandably, having data available to engineers on the specific thermal mechanics of LED-based devices within the system in which they are being used could be a huge step forward for future lighting designs.
This article describes a method that combines hardware measurement (a thermal transient tester), and computational fluid dynamics (CFD) software to provide high measurement throughput, which enables systems integrators to verify a vendor’s thermal resistance data during design and to test incoming commercial off-the-shelf parts before they are introduced into production. This data can be used during the design and product development phase to accurately capture the thermal response of an LED lighting system.
Read the full article here.
Editor's Note: This article originally appeared in the October 2014 issue of The PCB Design Magazine.
Suggested Items
Real Time with... IPC APEX EXPO 2024: all4-PCB, A Premier Solution Provider for the PCB Industry
04/22/2024 | Real Time with...IPC APEX EXPOIn the PCB industry, all4-PCB, is a top-tier equipment supplier and process solution provider. Ralph Jacobo highlights the active market and the demand for high-quality equipment, discusses their existing customers, investment in advanced substrates, and smaller board shops.
The Pulse: Drilling Down on Documentation
04/18/2024 | Martyn Gaudion -- Column: The PulseHow did a product aimed at signal integrity end up being more about documentation? For a little backstory, the Polar team has an unspoken “no business speak” rule at certain times. So, why is this column titled “Drilling Down?” I find it fascinating when a company sets off in one direction, but customers steer it in another. That’s what has happened here as customers took a product down a fork in the road we couldn’t predict. Your destination isn’t always where you initially set off to go, and that’s how we got to our subject of drills and drill documentation.
Real Time with... IPC APEX EXPO 2024: IPC Government Relations Holds Lawmakers Accountable
04/16/2024 | Real Time with...IPC APEX EXPOThe IPC Government Relations team is constantly educating Congress and the executive branch about the importance of a robust domestic electronics manufacturing industry. As Richard Cappetto explains, the GR team is focused on proactive strategies, workforce policies, and sustainability, as well as the significance of apprenticeship programs, President Biden's executive order, and employer incentives. Also discussed is the PCB Act, its investment program, tax incentive, and DoD's understanding of supply chain risk.
Catching Up With Chasom Electronics
04/16/2024 | Dan Beaulieu, D.B. Management GroupI recently met with Chasom Electronics’ founding director Anil Kumar. Chasom offers a unique menu of services for companies looking to extend their technology capabilities on a short- or long-term basis. Read on to learn about this very unique service company.
Marcy's Musings: The Growing Industry
04/16/2024 | Marcy LaRont -- Column: Marcy's MusingsAfter decades of steady decline in the U.S. and Europe, the PCB industry is finally growing, especially in China Plus One countries. The U.S. for example, which seemed to have abdicated its title as the world leader in innovating high-technology cutting-edge manufacturing processes, is now in a race to regain what it lost and then some. The PCB fabrication industry is growing in the West, thanks to DoD funding, the CHIPS and Science Act, and hopefully, the passing of HR 3249, the Printed Circuit Board and Substrates Act.