-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Design Data: File Naming Conventions
December 3, 2018 | Kelly Dack, CID+, EPTACEstimated reading time: 2 minutes
Have you ever Googled your name? Using the internet, I found out there are not many folks named Kelly Dack in the world, though I was surprised to find out there are a few scattered here and there. Now, imagine my shock if I were to be denied a loan, referred to as “Ms. Dack,” or passed up for a job opportunity because an auditor used the incorrect profile data from one of the other Kelly Dacks out there during my data verification process.
I have found that when searching for myself on the internet (come on, you do it too), I achieve better results by being more specific in my search criteria. For instance, simply adding “PCB” after my name helps to narrow the search criteria by being descriptive enough to show Kelly Dack the PCB designer and almost anything I am connected to within the PCB industry.
I recently read that up to 90% of the manufacturing data for the electronic design industry’s PCBs is still supplied in the non-intelligent Gerber data format. Regardless of the percentage, I know that the EMS provider I work for sees a lot of Gerber data from our customers. And we procure a lot of quality PCBs from our suppliers using Gerber data (unless we can’t). Sometimes information on an entire layer or other manufacturing files is missing. Again, Gerber data is not intelligent. It is graphic information only, and if measures aren’t taken by the designer to give us clues regarding how the artwork is configured, we must stop, ask questions, and seek clarification, which takes valuable time.
Working for an EMS provider, I am often asked to make sense of customers’ PCB design data packages that must be audited for completeness and manufacturability. Quite often, EMS operations receive data to produce a PCB design and begin the auditing process, only to be called off due to customer changes. Sometimes the data is incomplete, or it is missing one or more of the data files required to fabricate the PCB at the supplier. There are also occasions where a customer has sent files that were supposed to be the updated version but were not changed at all.
All suppliers of PCBs, including assembly services suppliers, make great efforts to verify that the data they are using to build the product for a customer is the latest up-to-date version. Every manufacturing process is tied to an internal product control number and revision. In production environments, the material does not move forward unless it has been checked, verified, and inspected to the revision control process in place. But what happens when the customer design data is not identified?
To read this entire article, which appeared in the October 2018 issue of Design007 Magazine, click here.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Tools, Training, and Trends in Manufacturing Engineering
04/25/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Product Specialist Erik Bateham of Polar Instruments discuss Polar's latest technology, including their role in aiding manufacturing engineers. They highlight the advanced capabilities of Polar's tools and the critical role of signal integrity analysis, as well as the importance of accurate modeling in board manufacturing. Polar's unique training approach and demonstration contact details are also explored.
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.