New LPKF CuttingMaster 2122 Improves Depaneling Efficiency
June 24, 2021 | LPKFEstimated reading time: 1 minute
LPKF has enhanced the performance of the proven and popular LPKF CuttingMaster depaneling system even more with a newly developed laser source. Initial applications demonstrate a significantly higher cutting speed and, as a result, an up to 25% higher output. For users, this yields a whole new dimension for improving efficiency in this price-to-performance range. It gives PCB manufacturers the full advantages of laser technology for the price of a milling machine.
Drawing on extensive expertise in both laser technology and depaneling, LPKF’s engineers have developed a special laser source that is now used in the latest addition to the CuttingMaster platform. It delivers precision and speed with high reliability. The time needed by the predecessor machine to cut a comparison sample in a 0.8 mm FR4 board with “FastCut” was already impressive at 7.3 seconds, but the new LPKF CuttingMaster 2122 does the job in just 5.9 seconds. That's a difference of nearly 20%, and it can even be more than that by using CleanCut technology. All this is achieved with the same invest. In the cutting of coverlayers, too, the new laser system achieves a considerable improvement for the price-to-performance ratio. Compared with the prior state of the art, the LPKF CuttingMaster 2122 makes it possible for users to achieve a whole new level of performance and added value. With it, LPKF combines the advantages of laser technology in a particularly cost-efficient system.
All laser machines of the LPKF CuttingMaster 2000 series are ideally suited to cutting of flexible, flex-rigid, and rigid PCBs – made of, for example, FR4, polyimide, or ceramics. With laser cutting, no mechanical or appreciable thermal stresses are introduced. Therefore, even sensitive substrates can be processed with high precision. Ablation products are directly extracted. The cutting channels are just a few µm wide for optimal panel area utilization.
Processing by the LPKF CuttingMaster is completely software-controlled. The layout files can be transferred to the machine with a click of the mouse – no lengthy changeover or prior elaborate tool manufacturing is required. Processing parameters and laser paths are adapted to take into account varying materials or cutting contours directly. The high level of automation of the compact system, which can be selected modularly depending on the application, results in high throughput and high repeatability.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/10/2024 | Marcy LaRont, PCB007 MagazineSpring is a renewal each year as dormant flora bloom, and baby ducklings and geese are ever present in local bodies of water. Even though it is beginning to get hot, I love this time of year in Arizona, with the sun waking me around 5 a.m. It fills me with an energy that I often lose in the dark winter months. Wherever you find yourself in the world, I hope you are enjoying Spring and that you are filled with energy and enthusiasm for all the great work part of our daily lives in this industry.
IPC Focuses on Education and Onboarding
05/09/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with Carlos Plaza, senior director of education for IPC, about expanding educational efforts in the PCB design, fabrication, and assembly segments. As Carlos explains, PCB design is a hot topic, but onboarding may be the hottest one of all.
American Standard Circuits to Exhibit at Focus on PCB 2024 Italy
05/09/2024 | American Standard CircuitsAmerican Standard Circuits will be exhibiting at this year’s Focus on PCB Italy 2024 to be held on May 15 and 16 at the Vicenza Expo Centre, Vicenza, Italy.
MKS’ Atotech, ESI to Participate in CPCA Show
05/09/2024 | MKS’ AtotechMKS’ Atotech, and ESI will participate in the CPCA Show 2024. The show will be held from May 13 to 15, 2024, at the National Exhibition and Convention Center (Shanghai) and will bring together domestic and international manufacturers in the electronic circuit industry.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.